Vacuums

Dyson is Pulsing On/Off

Dyson is Pulsing On/OffYou just make a mind to clean your room and the Dyson vacuum starts pulsing on and off? It’s never fun when your vacuum runs into a problem. What should you do if your Dyson cordless vacuum cannot stop pulsing on and off? We did some research and have the answers ready for you. Let’s have a look at this.

We’ll start by going over all there is to know about Dyson cordless vacuums and how to keep them clean. We’re here to help, whether you’ve had this happen previously or you’ve just observed your machine pulsing. So, without further ado, let’s get started on this issue!

It’s possible that your Dyson cordless vacuum is pulsating on and off in a plethora of ways. Most of the time, your vacuum starts warning you of an obstruction inside the machine that is restricting airflow. Sometimes, all you have to do is clean your Dyson’s dirt bin, so pulsing isn’t a big issue but should be solved.

Dyson is Pulsing On/Off

A blockage restricting airflow inside your machine or blockage in the charger is caused if the Dyson vacuum starts pulsing on and off or only operates for short periods of time. 

Dyson’s vacuums are designed to warn users of potential problems, thus pulsing is perfectly normal. Check your vacuum’s dirt bin and make sure it’s fully charged on a regular basis. If the vacuum is not fully charged then maximum charging won’t let the vacuum stay on. This procedure is not long because a vacuum takes a max charging time and should be 45 minutes to charge before it’s ready to clean.

How often to charge Dyson Vacuum?

It’s a good idea to fully charge your Dyson cordless vacuum especially charge after you use it. This is either a plug-in cable or a wall-mounted charging dock that you may use to keep your vacuum on/attached to between cleaning, which depends on the type you have.

See also  Shark Duo Clean Roller Brush Not Spinning

A Dyson cordless vacuum’s maximum charging time should be 45-60 minutes to fully charge. So, this operation takes no more than an hour.

Where is the Dyson Cordless Vacuum Filter?

On a Dyson cordless vacuum, look towards the top of the motor to discover the filter. The filter will resemble a purple button type that you can twist and pull it out from your machine. You may also clean your Dyson’s post-filter (the purple portion at the back of the vacuum) by twisting it clockwise. If you want to avoid a blockage, clean it twice a month.

Wash filters with cold water and repeats this procedure a couple of times. After that, squeeze out the water and let them dry for 24 hours. Now insert them back into Dyson. Cheers, you are ready to clean!

Why is My Dyson V10 Pulsing?

If your Dyson V10 is pulsing, it’s most likely due to blockage or dirty attachment. You should remove extra parts of the vacuum to fix this issue and clean every part of the vacuum with a soft brush or cloth.

By sliding the switch toward “max” turn on the machine at max mode for at least 10 seconds. Then, pull and hold the trigger on your Dyson to fix the pulsing.

Why is My Dyson V7 Pulsing?

Dyson V7 pulsing is always the result of a dirty filter. As previously stated, the vacuum’s purple front-end filter should be removed and washed in cold water. Once that is completed, allow it to dry overnight before placing it back into the vacuum. This should fix Dyson v7 pulsing in your vacuum.

Dyson V6/V8 pulsing:

You should do the same process for Dyson V6/V8 pulsing as mentioned above for Dyson V7.

Why Does my Dyson Keeps Flashing Filter?

If your vacuum isn’t fitted correctly then it starts flashing with a filter indicator. Remove the filter from your Dyson to fix the problem. As soon as you’re done with that, twist the filter clockwise until you hear a “click.” You should also be able to put your vacuum’s filter back correctly in its proper place, with no space between it and the vacuum.

See also  Shark Vacuum Keeps Not Docking

Do Dyson Filters need to be replaced?

Yep, you should replace filters after 6 to 12 months for your Dyson vacuum. It’s a good idea to follow Dyson’s recommendation to get maximum efficiency from Dyson. 

However, you can also clean filters monthly basis but regular maintenance can increase the life of Dyson. So, frequent maintenance is crucial.

2 Pack Filter Replacement For Dyson:

It’s great to have two packs of Dyson replacement prefilters on hand, as well as a complimentary brush to clean your filter and remove sticky hairs or fibers that can get caught on your roller. This also means you’ll have enough replacements to enhance your home’s air quality and machine performance.  

Replacement Dyson V10 Filters:

Three filters and a brush are included in one package, allowing you to always have one filter ready to use. Simply said, the days of stressing over the lack of extra filters to change are over. This filter can make your vacuums perform at their best once more.

How Do I Reset My Dyson Cordless Vacuum?

  • Remove your Dyson’s charger/charging dock from the wall.
  • Disconnect your vacuum’s charger from the wall and then plug it back.
  • Hold the start button down for 20 seconds on your Dyson.
  • Turn your machine on after removing it from the charger.

How Long Do Dyson Vacuums Last?

Usually, it is expected that a Dyson vacuum will last between 7 to 10 years on average. Although Dyson vacuums are one of the best options available, despite the fact that the machine gets less efficient over time. 

See also  Best Vacuum For Vinyl Plank floors and Pet Hair

Cordless Dyson vacuums have a somewhat shorter lifespan about four to five years before requiring a new battery. 

Are Dyson Vacuums Worth it?

 Dyson vacuum cleaners are expensive but well worth it. Although Dyson items are pricey, they are made with groundbreaking technology and come with amazing products with generous warranties.

Dyson has revolutionized the cleaning game and transformed the way people clean their homes, particularly when it comes to cordless vacuuming. Again, it boils down to personal preference, but Dyson is the way to go if you want a durable and long-lasting vacuum.

Final words:

Even if you’ve used Dyson vacuums before, you need to know how to fix a pulsating cordless one. When your vacuum’s bin is full or one of its attachments is blocked, you may hear pulsing. You avoid this, be sure to clean it regularly.

You should replace Dyson’s front and back filters every six to twelve months to keep them working properly. The dirt bin of your vacuum cleaner should be cleaned weekly or every time you use it to avoid motor problems. You can always use cold water to wash Dyson’s filters, but don’t overlook to start charging your vacuum between uses.

About the author

Ghulam Ali

Ghulam Ali is a technology lover and loves to write about laptops, monitors, printers, tablets, and anything that's related to computers and games. He is passionate enough that he maintains this blog regarding tech updates on a daily basis.