Whirlpool Duet Dryer Not Spinning

Whirlpool Duet Dryer Not SpinningDoing laundry in a duet dryer helps you efficiently handle the mess of wet clothes. Still, all this can become a nightmare when the Whirlpool duet dryer is not spinning, which can be due to any reason, and that’s what we are going to discuss how to figure out why the whirlpool duet dryer is not spinning and how to fix it.

Whirlpool Duet Dryer Not Spinning

The most common reason for a Whirlpool duet dryer not rotating is a broken belt drive or damage due to the rough use, and you never cared to check if it needs a replacement. But, if that’s why the whirlpool duet dryer is not spinning, then take a look at the belt and figure out that it needs adjustment or replacement, and you will be good to go.

If you are trying to figure out why the Whirlpool Duet Dryer is not spinning, let’s look at some possible reasons and solutions.

Broken Belt Drive

A broken belt drive seems the most common, but a serious reason for a duet dryer not spinning is that the belt is still made up of a destructible material, and the long usage time can wear it out.

Open the machine’s door to see the broken belt and replace it with the new one; you can get a good belt and some tools like pliers, screwdrivers, and scissors.

Top Reasons for Whirlpool Duet Dryer Not Spinning :

Broken Belt Drive: 

To change the belt, access the dryer’s back panel and cut off excess materials with the scissors around the drum axle, which is flat while tightened down. Next, remove the screws from the sides, and you will be able to remove the bracket holding the side plate, which is holding the clamps that hold the belt. Now, remove the other two screws on the plate, pull it out from both sides, and gently slip off the old drive belt. With the same approach, but the new belt and make sure it is properly seated before tightening down the clamps again. You can replace bolts with washers for safety measures as well. Agree or not, the belt works hard to spin the drum with the motor, and the motion or weight can easily tear or break it with time or overly heavy loads. Sometimes belt can loose, and you can check that by spinning the drum by hand. 

See also  How Many Amps Can 6 Gauge Wire Handle?

Worn Drum Support Rollers:

Two rollers at the bottom support the drum. They are made up of plastic which means they are prone to break or worn, which can also be why the WhirlPool dryer is not tumbling. Another sign of the faulty drum support rollers is when you hear the dryer making thumping noises.

You cannot look at the rollers with a naked eye, so to do that, you have first to remove the dryer belt and try to rotate the drum by hand. If you feel resistance, the rollers are damaged and need to be replaced.

Broken Idler Pulley:

The broken Idler pulley is also a common reason for the Whirlpool Duet dryer not spinning. Suppose you notice that that belt is intact the Whirlpool dryer is unable to rotate. In that case, that means the Idler pulley is damaged due to overloading that creates tension on the belt and increases the friction for movement of the drum. Take a look inside the cabinet and try to spot damaged pulley parts like bent metal edges, and if you see any, that’s a sign to replace the Idler Pulley.

Drive Motor Failure:

Another big reason for the dryer not spinning is the failed drive motor that turns the drum, and if the motor gets failed, there won’t be any rotation for clothes drying. Fortunately, the motor failure won’t cause bigger issues except for loud noises, but there is a greater risk of damaging other machine parts. These intermittent issues can occur when your system is shutting down or due to overheating. The motor failure is an expensive problem for a dryer, and you will figure that out when the clothes are sweaty.

See also  How Many Amps Can 12 Gauge Wire Handle

So, do your basic inspection and unplug the dryer from the outlet. Also, remove all the clothes from the cabinet and make it empty. Now, remove the screws and the plate to access the dryer’s interior. Get help from someone to hold the panel while you unscrew it and then get the damaged motor out and similarly replace it with the new one.

Dryer Drum Obstructed:

Another reason for the Whirlpool duet dryer not turning is the obstructions stuck under the drum preventing the drum from spinning. What happens when the stuff falls from the pockets of clothes like needles, pen caps, coins, or other larger debris that can easily get lodged in the dryer drum stopping it from spinning. A helpful tool for such a problem can be a vacuum cleaner that will efficiently suck up every loose bit of debris that you won’t be able to pick by hand.

whirlpool dryer won’t spin, the drum is obstructed with lint, remove the clothes from the machine, use a vacuum hose to suck up loose bits of debris from the interior, lint built up around filters, check the rear seal, worn out, replace it or put some silicone grease lubricant, 

See also  How Many Amps Can 4 Gauge Wire Handle?

Faulty Drum Rollers:

Sometimes the faulty drum rollers can be the reason for the Whirlpool duet dryer not spinning. That’s why the whole drum will require replacement that won’t be possible without professional help.

Worn Out Drum Bearing:

As you know, the drum spins on the bearings, and if you experience any strange noise coming out of the drum, that means the noise is coming from the rear drum bearing, due to which the spin cycle will decrease and the drying efficiency. So you should also be careful with some safety issues like fire from overheating or lack of airflow because of the funny noise coming from the back.

Robert Smith
Latest posts by Robert Smith (see all)

Content Details

About the author

Robert Smith

Robert Smith is a technology lover and loves to write about laptops, monitors, printers, tablets, Apple products and anything that's related to computers and games. He is passionate enough that he maintains this blog regarding tech updates on a daily basis.