Why Whirlpool Refrigerator LED Lights Flickering

 A refrigerator is definitely a complex machine. Sometimes you can feel that something is wrong with your appliance but you can’t quite put your finger on it. In the case of fridge LED lights flickering, you may be able to put your finger on it(literally, not figuratively), but you still don’t know what to do! If you are pondering why Whirlpool refrigerator led lights flickering, we have got the answer you need.

In this guide, we have discussed in detail the reason behind your LED light flickering, how to counter it and how to avoid it. So, keep reading!

Why Are There LED Lights on a Refrigerator?

Why Are There LED Lights on a Refrigerator?

The LED lights are controlled by a microprocessor that monitors their status and adjusts them accordingly. If one of the light bulbs on a cycle goes out or if there’s an error in the code, it will cause all of them to flicker, this is normal for LED lights. So, in this case, when you open the door of your refrigerator, LED lights will appear to be strobing.

It’s no secret that LED lights use significantly less energy than traditional incandescent light bulbs. They also last much longer, making them a more environmentally friendly option.

So it’s no surprise that many homeowners are opting to replace their old light bulbs with LEDs. However, It’s normal to experience a little bit of flickering with LED lights, but when it becomes excessive, it can be irritating and can even cause problems with your appliance.

If you’re experiencing flickering with your whirlpool refrigerator LED lights, don’t worry, we’re here to help! In this blog post, we’ll talk about what causes LED lights to flicker and how to fix the problem.

Why are Whirlpool Refrigerator LED Lights Flickering?

If your Whirlpool refrigerator LED lights are flickering, there could be a few different reasons behind it. First, it could be a sign that the bulb is going bad and needs to be replaced. Another possibility is that there is a loose connection somewhere in the wiring. It could also be caused by a problem with the power supply.

Another reason could be that the water filter is not properly installed. You can check by simply turning off your refrigerator and checking to see if the water filter is in place. If it isn’t in place, try again, or contact a technician for help. If it is in place but still not working, check to make sure that your refrigerator’s light switch assembly is functioning properly. If the light switch assembly isn’t working either, then there may be an issue with the light bulb or the socket.

If you’re not sure what’s causing the problem, the best thing to do is to contact a qualified repair person. They’ll be able to diagnose the issue and recommend the best course of action. In most cases, fixing a flickering LED light is a simple and straightforward process. However, if the problem is more serious, it’s always best to err on the side of caution and call in a professional.

See also  What Size Chest Freezer Do I Need

What to Do if Your Whirlpool Refrigerator LED Lights Start Flickering?

When you have a problem with your fridge, it can be really frustrating. But, if you simply take a few minutes to troubleshoot the problem, you can find the source of the issue and fix it yourself! The whirlpool refrigerator LED lights flickering is a common problem and can be solved with a few simple steps. If you have this problem, there are three things you should do:

Check for power supply issues:

  1. First, check to see if the flickering is happening with all of the LED lights or just one. If it’s just one light, then you can try replacing the light bulb. If that doesn’t work, then you may need to replace the entire light fixture. If the flickering is happening with all of the LED lights, then there are a few things you can try. First, check to see if the issue is with the power source. If the power source is fine, then you can try resetting the refrigerator. To do this, unplug the refrigerator for 30 seconds and then plug it back in.
  2. Check the temperature of the refrigerator. If it is too cold, your refrigerator will not respond to the light switch. You can adjust the temperature by turning on the thermostat or turning it off and then on again.
  3. Check the power to your refrigerator by unplugging it and waiting for a few minutes. If there is still no response after doing this, then you will need to replace parts on your control board or contact a professional technician who can replace these parts for you at an affordable price!
  4. Try resetting your control board by removing all of its screws from underneath it before plugging them back in one by one until they click back into place (usually takes about five seconds).
  5. If you determine that the issue is with the power source, make sure that everything is plugged in correctly and that the outlet is working. If the outlet is fine, there could be a problem with the circuit breaker. Flip the switch off and then back on again to see if that fixes the issue. If not, you’ll need to call an electrician to come to take a look.

Check for light assembly issues:

The light switch assembly could be the cause of your flickering lights. Follow this guide to find the problem and fix it:

  1. First, check to see if your water filter is installed correctly. You can tell if it’s installed correctly by looking at the back of the refrigerator, where a door has been removed to reveal a metal panel with holes in it. If you see a wire sticking out from one of these holes, then your filter is installed correctly. 
  2. Next, check whether there’s something wrong with the light switch assembly itself, that is, whether there’s something wrong with the way it’s connected to other parts of the fridge that may be causing an issue (like a water line or power cord).
  3. Finally, check whether there’s anything wrong with the light bulb or socket itself, maybe it needs to be replaced.
See also  How to Move a Refrigerator to Clean Behind

Check for General Issues:

Here are some common things that cause LED lights to flicker:

  • A loose screw or wire in the light fixture itself
  • A bad switch on the circuit board itself
  • Bad capacitors on the circuit board (these are usually at the top of the circuit board)

To troubleshoot such problems;

  • Use a voltmeter to see if there is power in each leg of your circuit (there should be two, ground and live). If not, you may need a new switch or fuse box. 
  • Try unplugging everything from your fridge and leaving it for several hours before plugging back in again. This will reset any capacitors that might be bad. If this doesn’t work, try using an appliance repair kit instead!

General Tips for maintaining your whirlpool refrigerator:

Whirlpool refrigerator LED lights flickering can be quite annoying and frustrating, especially if you don’t know how to prevent it from happening in the future. In this section, we’ll give you a few tips on how to stop your whirlpool fridge LED lights from flickering.

  • One thing you can do is make sure that the area around the fridge is well-ventilated. This will help keep the air circulated and prevent the LED lights from overheating and flickering.
  • Another thing you can do is clean the coils on the back of the fridge regularly. Dust and dirt can build up over time and cause the coils to overheat, which can then lead to flickering lights.
  • Lastly, you can try replacing the bulbs with LEDs that have a lower wattage. This will help reduce the amount of heat that’s being generated, and thus, the flickering. 
  • Check the seals on the doors to make sure they are tight and clean.
  • Clear away any items that may be blocking the vents.
  • Clean the coils monthly with a coil brush (you can find this at most hardware stores).
  • Be sure to follow the manufacturer’s recommended settings for temperature control.

By following these simple tips, you can help extend the life of your fridge and ensure that it continues to run smoothly for years to come. 

See also  How Long Does It Takes To Defrost A Frost Free Freezer


We hope these tips were helpful, and that by troubleshooting the issues, you were able to pinpoint the root cause. If so, we would love to hear from you in the comments section below! Just keep in mind, if you aren’t sure, call in a professional. The last thing you want is to make matters worse. Thanks for reading and we hope this was helpful! As always, feel free to reach out to our team if you have any further questions or concerns. We’re always happy to help! Have a great day!

Related Articles

Robert Smith
Latest posts by Robert Smith (see all)

Content Details

About the author

Robert Smith

Robert Smith is a technology lover and loves to write about laptops, monitors, printers, tablets, Apple products and anything that's related to computers and games. He is passionate enough that he maintains this blog regarding tech updates on a daily basis.